E-mail:info@changyuan-al.com      Hotline:+86-371-63382659

                HENAN CHANGYUAN ALUMINUM INDUSTRY CO., LTD

                Current location:Home > Changyuan News > Products

                Introduction of 5052 alloy

                 5052 aluminum plate for AL - Mg alloy aluminum, magnesium is the main alloy elements in 5052 aluminum alloy, is one of the most widely used antirust aluminium, the alloy of high strength, especially the fatigue strength, plasticity and high corrosion resistance, can not heat treatment to strengthen, in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad, can be polished.
                Aluminum - magnesium alloy also contains a small amount of manganese, chromium, beryllium, titanium etc. The manganese in the alloy except for a small amount of solid solution, most forms MnAl6. The effect of chromium on 5052 aluminum plate is similar to that of manganese. It improves the anti-stress corrosion cracking ability, improves the strength of the base metal and weld seam, and reduces the tendency of welding crack, but its content is generally not more than 0.35 percent

                aluminum sheet

                5052 belongs to al-mg alloy and is widely used, especially in the construction industry. It is the most promising alloy. Good corrosion resistance, good welding, good cold processing, and moderate strength.
                5052 main alloy elements for magnesium, has good forming performance, corrosion resistance, weldability and medium strength, used to make airplane oil tank, oil pipe, as well as the transportation vehicles, ships, sheet metal parts, instrument, lamps stent and rivet, metal products, electrical and shell, etc. (2) AL - Mn alloy, is one of the most widely used antirust aluminium, the alloy of high strength, especially the fatigue strength, plasticity and high corrosion resistance, can not heat treatment to strengthen, in a cold work hardening plasticity is good, when the cold work hardening plasticity is low, good corrosion resistance, good weldability, cutting performance is bad, can be polished. Purpose is mainly used for high plasticity and good weldability, working in a liquid or gas medium low load parts, such as tank, gas or oil duct, and other various liquid containers made of deep drawing small load parts: wire used for rivet.

                5052 aluminum plate use is mainly used in the request high plasticity and good weldability, are commonly used to transport vehicles, ships of sheet metal parts, instrument, lamps stent and rivet, metal products, electrical enclosure, etc. It can also be used to make aircraft fuel tanks, tubing, and aerospace aluminum alloy materials, which are typical corrosion resistant alloy materials.

                5052 Chemical composition
                Standard:GB/T 3190-2008,EN 573-3,ASTM B 209

                Aluminum Al: remainder; Si Si: 0.25;
                Copper Cu: 0.10; Magnesium Mg: 2.2 ~ 2.8;
                Zinc and zinc: 0.10; Manganese Mn: 0.10;
                Chromium Cr: 0.15 ~ 0.35; Iron Fe: 0.4 0

                Which aluminum products can be made by 5052 aluminium alloy in Changyuan Aluminum?
                5052 Aluminum alloy is widely used in producing the 5052 aluminium coil,5052 aluminum sheet,5052 aluminum tread plate,5052 aluminum plate,5052 aluminum circle and so on.
                The details information is as follows:
                Products: 5052 aluminum sheet,5052 aluminum plate,5052 aluminum circle
                Thickness:0.5mm -6.0mm for 5052 aluminium sheet
                6.1mm-350mm for 5052 aluminum plate
                0.5mm-8.0mm for 5052 aluminum circle
                Width:300mm- 2200mm for 5052 aluminum sheet
                1000mm-2600mm for 5052 aluminum plate
                20mm-1000mm for 5052 aluminum circle
                Length:up to 11000mm
                Package term:wooden pallet,about 2.5 Mt Per pallet
                Products: 5052 aluminum diamond plate,5052 aluminium tread plate
                Thickness: 1.1mm-6.0mm
                Width:300mm-2000mm
                Length: up to 10000mm
                Surface type: one bar,two bar,three bar,five bar; mirror or matte
                Package term: wooden pallet,about 2.5 Mt per pallet
                 

                The surface quality of 5052 aluminum products
                1. Cracks, corrosion spots and nitric marks are not allowed on the surface.
                2, is allowed on the surface depth is less than 8% of the nominal size peeling defect part wall thickness, air bubbles, surface coarse and local mechanical damage, but the defect depth is not more than 0.5 mm, defect sheet with a total area of no more than 5% of the total area.
                3. Allow the supplier to light the profile vertically to the surface smooth.
                4. Other requirements: the demand side and the supplier shall draw up themselves


                HENAN CHANGYUAN ALUMINUM INDUSTRY CO., LTD
                WEB:www.kkrr5.com
                Please indicate the source if it is reproduced

                Name (*)
                Contact (*)
                Address
                Title (*)
                information
                婷婷色